30 Miles 8W Solar Powered Electric Fence Charger Portable Solar Fence Controller Charger for Farm

Feature: 1. [Durable Material] Made of high quality ABS material, durable, resistant to cold weather, not easy to damage, can be used for a long time. 2. [Lightweight And Portable] The solar powered fence controller is exquisite in workmanship, which is small in size, light in weight, and easy to carry. 3. [Simple To Use] The solar electric fence controller has stable performance, simple and easy to use, and is widely used in farm solar fences. 4. [Long Service Life] This solar powered fence controller lasts up to 3 weeks without the sun (battery not included), so you can use it with confidence. 5. [Widely Application] This solar electric fence charger is widely used in many situations, such as outdoor, animal farm, garden, etc. Specification: Item Type: Solar Powered Fence Controller Material: ABS Product Size: Approx. 36.5 x 33.5 cm / 14.4 x 13.2 in Approx. 26.5 x 18 cm / 10.4 x 7.1 in Adapter Voltage: 100-240V Power Output At 500 Ohms: 1J Output Power Vacuum: 1.3J Effective Area: 100 acres Effective Length: 30 miles Solar Power Consumption: 47mA Vacuum Voltage: Maximum 10KV Waterproof Grade: IP65 for outdoor use Monocrystalline Silicon Solar Panel Maximum Power (Pmax): 8W Maximum Power Supply Voltage (Vmp): DC 18V Maximum Power Current (Imp): 0.44A Open Circuit Voltage (VOC): 21.6V Short Circuit Current (Isc): 0.47A Power Cupply Battery: DC 12V, NP12-8AH battery (Battery Not Included) Days Run Without Sunlight: 3 weeks Application: Fence In the battery (if necessary), the connections must be made as follows: 1. Connect the positive (red) to the positive (+) terminal on the battery 2. Connect the negative (black) to the negative (-) terminal on the battery Standby Mode: When the intelligent battery management function puts the unit into standby mode, the battery charge is below the "safe operating level". In standby mode, the unit continues, but it does not provide pulses to the electric fence. When the solar panel is charged, the unit will resume delivering pulsed batteries above a "safe operating level". When operation resumes, the battery charge level is still low, so the device will provide pulses every 3 seconds. Once the battery reaches normal charge Level: Pulses revert to one pulse every 1.5 seconds Weight: Approx. 3600g / 127oz. Package List: 1 x Solar Fence Controller (Battery Not Included)1 x Power Adapter1 x English Manual2 x Clip Note: Precautions1. Disconnect the unit from the fence and checkThe indicator light is flashing.2. Check battery connection and voltage.3. Check the voltage between site and ground4. Use a fence voltage tester with terminals greater than 7000V.Before using this solar controller for the first time, you must pay attention to:1. Insert the battery into the battery box (battery not included).2. Connect the battery terminals.3. Face the true southern hemisphere and true north southern hemisphere through the solar panel by placing the device in full sunlight, symbolic key 3 on the unit, battery and connect the battery terminal.Keep away from floods and contact with animals and children