SOUND WARRIOR Made in Japan Vacuum Tube Amplifier Speaker Set Good Quality Bass Broadband Vacuum Tube Integrated Amplifier Preamp Phono Analog Audio

---------------------------------------------------------------------- 【Voltage Compatibility】 When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction. 【Plug Type】 Our products use Japanese plug types (A or B type). Please use a conversion adapter if necessary. 【Important Note on Transformers and Adapters】 A transformer adjusts voltage to match your device’s requirements. A conversion adapter only changes the plug shape and does not adjust voltage. Using only a conversion adapter without a transformer may result in damage to the product. 【Liability】 We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer. ---------------------------------------------------------------------- The gentle and deep tones of vacuum tubes do not interfere with meals or conversations in the relaxing living room or dining room, allowing you to casually and comfortably enjoy music. The circuit is newly designed as an all-analog Class A integrated amplifier. The HiFi technology and design philosophy cultivated in the SOUND WARRIOR series have been fully utilized to achieve high sound quality. Three input terminals are available, including a phono input that can be connected to an analog record player. The output terminal comes with one speaker output terminal and a linked headphone terminal. The speaker is a 1-way 6.2cm full-range unit, with an orthodox bass reflex speaker structure. The speaker unit uses a Peerless unit from Tymphany in Denmark. Bass reflex ports are placed in the four corners of the front to maximize the port effect, while not overdoing the low range and producing a straight and powerful sound that is unique to a full range. *Please note* The "U.S. GE JAN 5654W Vacuum Tube Amplifier Replacement Vacuum Tube 2-Piece Set Military Grade Product" listed under "Products often purchased together" on the page cannot be used as it is not compatible with the SWL-A1SET1. please note. ■The gentle and deep tones of vacuum tubes The gentle and deep tones of vacuum tubes do not interfere with meals or conversations in the relaxed living room or dining room, allowing you to casually and comfortably enjoy music. ■Pursuit of reality through wideband playback SWL-SA2 is a 1-way 6.2cm full-range unit with an orthodox bass reflex speaker structure. The speaker unit uses a Peerless unit from Tymphany in Denmark. Bass reflex ports are placed in the four corners of the front to make the most of the port effect, while the low range is not overly greedy and features a straight and powerful sound that is unique to a full range. This is a speaker that you can enjoy for a long time in your living room. ■Compact body of A4 size The tube amplifier/SWL-AA1 has a body floor space of A4 size, and has a design that harmonizes with the interior even when placed on a living room sideboard, bookshelf, dining table or counter. ■Minimalistic and compact design The speaker is compact enough to match the stylishness of a vacuum tube amplifier. Painted in matte black to blend in with the interior. [Vacuum tube amplifier/SWL-AA1 specifications] Vacuum tubes used: 6BQ5x2, 12AX7x1 Input terminals: LINE 1 = φ3.5 mm stereo mini jack (priority) RCA pin jack L/R, LINE 2 = RCA pin jack L/R, LINE 3/PHONO = RCA pin jack L/R Input sensitivity: LINE 1φ3.5 mm / LINE 3 = 270mV, LINE 1RCA / LINE 2 = 410mV, PHONO = 5mV Output terminal: Speaker output = Speaker terminal L/R / Headphone output = φ 3.5 mm stereo mini jack Maximum speaker output: 3.2Wx2 (1kHz distortion rate 10%) Speaker impedance: 6Ω or more (6Ω to 8Ω recommended) Headphone impedance: Compatible with 40Ω to 100Ω Speaker output frequency characteristics: 20Hz to 20kHz (0dB, -2dB) Tone control: Shelving characteristics High (CUTOFF 3kHz) ±12dB variable, Low (CUTOFF 100Hz) ±12dB variable Power supply: AC 100V 50/60Hz Body size: W290mmxH92mmxD210mm Body weight: approx. 3.7kg Accessories: Instruction manual x 1, warranty x 1 Warranty period: 1 year Country of origin: Japan [Bass reflex speaker/SWL-SA2 specifications] Format: 1WAY (6.2cm full range used) Bass reflex type Frequency response: 0Hz to 20kHz Input impedance: 4Ω *The vacuum tube integrated amplifier "SWL-AA1", which is a set product with this unit (SWL-SA2), is listed as having a speaker impedance of 6Ω or more (6 to 8Ω recommended). Although the input impedance of this unit is 4Ω, we have confirmed that there are no operational problems when connecting it to the SWL-AA1. Output sound pressure level: 86 dB (2.83V /1m) Rated input: 30W Maximum input: 60W Body size: W125 x H125 x D220 mm Body weight: 1.35kg (1 unit) Accessories: Speaker cord (1m x 2), instruction manual Warranty period: 1 year from the date of purchase *Please keep the delivery note and receipt that shows the date of purchase in a safe place along with the warranty card. Country of manufacture: Japan *Please note* The "U.S. GE JAN 5654W Vacuum Tube Amplifier Replacement Vacuum Tube 2-Piece Set Military Grade Product" listed under "Products often purchased together" on the page cannot be used as it is not compatible with the SWL-A1SET1. please note.