YunSCM 2 26 American style valve 26 bicycle tire tube 26 bicycle tube 26 bicycle tube 26 tire tube 26 road bike tube 26 pieces, 1.25 tube, 32mm, 1.5

✅【26x1.25-1.5 Bicycle Tube】: Applicable to 26x1.25/1.5 bicycles, American style valve 32mm. 26 1.25 The tube air intake has the same specifications as motorcycles and cars, so it was easy to fill with air. Easy and simple to use, no insect rubber required. Suitable for road bikes and cross bikes. Note: Please check the tire size before purchasing. Tire size is usually displayed on the side of the outside tire. ✅ [Does not take up much space and is convenient to carry]: The 26 1.5 tube has a small volume when folded, so you can carry it with you when you go out and run long distances, avoiding the awkward feeling of not being able to ride after the tube gets punctured. . ✅【High Quality Butyl Rubber】: This material bicycle tube 26 1.25 can provide better airtightness and retain air for a long time, no need to hit the air all the time. ✅【Budget Savings】: Doing it yourself will save your budget than going to the local store to replace your tires. As a spare bicycle tube, you can avoid the awkward feeling of not being able to ride after the tube bursts. ✅【Correct installation method】: First, push the tube into the rim to let a small amount (20%) of air into the tube. Next, install the tire, make sure the edges of the tire and rim are aligned and the tube is not pinched, and then re-inflate the tube to the correct air pressure. (If the tube and tire are not inflated together, i.e. if only the tube is inflated, or if the tube is pinched between the tire and the edge of the rim, air leaks and punctures may occur. Please note that it may become easier.) Compatible with wheel diameter 26 inches, tire width 1.25-1.5 inches. (Tires common to the 26x1.25-26x1.5 section). Item includes: 2 x 26x1.25/1.5 bicycle tubes. About shipping: The shipment is timely, the package is stored in the Amazon warehouse, and once we receive your order, Amazon will ship your item in a timely manner. How to install tires and precautions: 1. The rolling direction of a tire is the mounting direction of the tire (some tires are marked with an arrow, and the direction of the arrow is the rolling direction of the tire). First, clean the inside and outside of the tire to prevent the presence of foreign substances such as gravel and impurities, and then install the tire according to its rolling direction. 2. After installation, inspect whether the bead (tire edge) is uniformly symmetrical, the bead must be outside the bead in all places and parallel to the bead in all places. Otherwise, there will be blurring when driving. 3. Insert the tube evenly into the tire with a small amount of air filling (less than 10%), stack the carcass in order and do not fold it inside the tire (folding and inflating it is easy to puncture), the tube and tire together over the steel ring, and inspect whether the lower tire is completely packed into the tire, and there should be no small step between the tire and the steel ring. You can then start aerating the tube. The installation is now complete.