Enhanced safety: excellent reflective performance, good wide-angle performance. Car reflective stickers provide enhanced safety at night and will not fall off due to the vehicle's daytime aesthetics. Therefore, it can improve the safety of your vehicle. Made of PET, it is very suitable for your car, motorcycle, trailer, etc. It has an uneven surface, so it will be better than other films and better molds.
Easy to disassemble: Because of its good performance, it is easy to paste in the car or inside the car. After adsorption, press moderately to ensure that there is no air between the reflective sticker and the bonding position.
Scope of application: Mainly used in road transportation facilities, vehicles, bicycles, automobiles, motorcycles, ships, fairways, stages, various passages and related mechanical equipment, and almost any other possibility that requires enhanced visibility.
Excellent quality: 100% brand-new high-quality car stickers are wear-resistant, scratch-resistant, washable, water-resistant and anti-freezing.
How to use: Please confirm that there is no residue or dust, and it must be dried before pasting. Do not touch the glue on the back, apply the film once, and do not move repeatedly. After sticking, press gently to ensure that there is no air between the reflective sticker and the bonding position.
Specifications: a set of 2 pieces, reflective body stickers car rearview mirror rear diamond-level reflective warning waterproof body reflective stickers reflective film
Size: 16 * 1.5cm
Color: silvery white, blue, red, golden yellow, fluorescent yellow
Material: special material for car stickers
Please carefully 1. the installation method of small car stickers with transparent transfer film (dry paste method) if the size is marked:
Tools: rags, scrapers or credit cards
1. Clean the car body and keep it dry.
2. Determine the position to be pasted. Under normal circumstances, slowly paste, scrape flat with tools, and uncover the bottom paper.
3. If the figure is really small, you can also tear off the transparent transfer film and sticker before pasting. But care must be taken to avoid accidental adhesions.
4. After pasting, scrape and press it several times. Remove the transparent transfer film.
5. Use a utility knife to cut a knife in the door and sewing of the car, and wrap it inward.
6. Do not let the car sticker and the body have any separation or protrusion.
2. installation method of large car stickers with transparent transfer film (wet paste method):
Tools: rags, sprinklers, scrapers or credit cards
1. Clean the car body and evenly sprinkle water on the part of the car body to be pasted-to reduce the viscosity of the sticker and facilitate adjustment of the position.
2. Determine the position of the car sticker. Slowly paste while gently scraping flat with tools while uncovering the bottom paper.
3. In case of door handle or anti-scratch strip, the material shall be cut open and wrapped according to the situation.
4. Adjust appropriately. After determining the general position of the figure, scrape water and bubbles repeatedly. Remove the transparent transfer film.
5. Use a utility knife to cut a knife in the door and sewing of the car, and wrap it inward.
6. Do not let the car sticker and the body have any separation or protrusion.
7. Try to let the moisture in the car sticker dry through, and heat and dry it appropriately if possible. According to the weather, wash it in a day or two.
